Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

1. Ultra-low power e-paper 1.54-inch display with a resolution of 200 x 200 and a wide viewing angle 2.Wi-Fi and Bluetooth LE connection 3.3-axis accelerometer with gesture detection 4. Real-time clock with calendar and alarm functions for accurate timing 5. Built-in USB to serial adapter allows programming anytime and anywhere 6.Vibration motor for alarm 7. Four buttons (use imported buttons, which feel better) 8. Open source hardware and software 9. Tons of examples and cool watch faces 10. Open source 3D case design 11. Built-in 3.7V 200mAh battery 12. The use of PCB upper and lower covers can better protect the screen, battery and various components on the motherboard. Watchy wakes up every 60 seconds, checks the accelerometer, real-time clock, and updates the e-paper display with the latest information. Some watch faces also turn on WiFi to get weather data. The Watchy should have 5-7 days of battery life when just timing time, and 2-3 days when getting data over WiFi. These numbers can be expanded with further optimizations (e.g. sleep during off-hours, wake only on movement/tilt, etc.) User Manual: Please scan the QR code on the product packaging Special note: Please be sure to select the hardware version V2.0 when flashing

Features:

2. Uses Wi-Fi and bluetooth LE connectivity to connect to internet APIs (Weather, News, Traffic, Maps, Spotify, etc.) and bluetooth LE devices.

4. Its display conserves power, only using power when updating, and remains clear and visible even in direct sunlight.

1. Click Set Wifi in the watch main menu. 2. Connect to the "Watchy Ap" wifi from another device, such as a mobile phone or computer/laptop. 3. Open 192.168.4.1 in your browser. On a Phone, this page opens on its own when connected to wifi. 4. Click on "Configure WiFi" 5. Enter the SSID and password. (Note: SSID can be pre-filled through the network listed at the top of this screen) 6. Click the "Save" button and wait for Watchy. 7. If the connection fails, the watch will display "Setup failed and timed out!" Otherwise, the local IP address and SSID of the connected network are displayed and confirmed.

Package includes:

1x Watch Band